- ☢Electirc Impact Wrench: This Enegitech cordless 18 volt lithium-ion 1/2 in. square anvil automatic impact wrench allows you to tighten or loosen various nuts and bolts of car and scaffolding, widely used for daily or heavy-duty applications indoor or outdoor
- ☢Brushless Motor: Built-in brushless motor, enables this tool to run cooler and more efficiently, optimizes battery energy use for up to 50% longer run time per charge
- ☢High Torque & Multiple Speeds: It delivers up to 30,97 in.lbs of max torque with 4 speeds (0-2,700 RPM Max & 0-3,500 IPM Max) which is more advanced than others on market. Note: it works with M10 M14 M16 bolts ONLY
- ☢2 Pack Battery: Long lasting battery ETB1830B with real capacity of 3.0Ah, give you enough service time and reduce the charging frequency. Package includes 2 batteries, good for replacement and keep your tool working. The LED indicator helps you know the juice left easily and you can recharge them in time
- ☢Fast Charger ETC1830: It delivers high output current up to 3A which could fully charge your batteries within 20-40 minutes. The indicator lights on charger show status as batteries are charged and maintained
Get the most performance out of this tool with the included 18-Volt 3.0Ah real capacity battery and 3A fast charger which improves the performance of Enegitech tools up to 35%.
1st Speed: 0-1000 RPM, 0-1500 IPM, 180 NM/1593 IN.LBS; 2nd Speed: 0-1600 RPM, 0-2000 IPM, 230 NM/2035 IN.LBS; 3rd Speed: 0-2200 RPM, 0-2800 IPM, 330 NM/2920 IN.LBS; 4th Speed: 0-2700 RPM, 0-3500 IPM, 350 NM/3097 IN.LBS.
Turn left/right of the rhombus button to be forward/reverse mode which helps you fasten or loosen the screws easily.
If you turn on the Autostop button, it will stop rotating after working a few seconds even if you keep pressing the trigger. Release and press the trigger again, then it will work again, to avoid the nuts falling off. Note: Only for Reverse Mode.
Professional in Details:
All-metal gear construction for longer life and durability, rubberized grip for added comfort and reduced fatigue.
Continuously Variable Transmission
The speed is controlled by the force of pressing the button and the shift is smoother.
30min Charger and 2 * 3.0Ah Batteries
Enegitech charger ETC1830 charges a 18-Volt batteries ETB1830B in as little as 30 minutes. The 3.0Ah batteries are rechargeable which could last for a long time.