Battery chemical leak is the uncommon incidence that may happen if you leave a battery in your electronic devices over a longer period of time. The white color substance comes out from the battery, which can damage your electronic devices. The best way to use your household batteries is to use your electronic gadgets often or take out the battery if you are not using your electronic devices for a longer time.
Most commonly, we leave batteries in our devices if not using, so the question is if your battery spill acid how to clean the chemical spill without creating any tragedy?
Here in this article, we will highlight a few essential precautions and useful measures you should take while cleaning the acid.
Let’s find out:
- Wear Protective Clothing
Always wear eyeglass, hand gloves, and cover your face with a face mask. A standard corroded AA size battery can burn your skin within direct contact with the skin. If you have long with hair, then tie it. AA size batteries put down a few sheets of newspaper before beginning the process.
- Do Preliminary Cleaning
This is the second most important measures; heavy corroded batteries may get stuck permanently use a toothpick or screwdriver to plug it out, this act will leave a message why wearing eyeglass is essential, because the corroded battery can fly in the air and can hurt your face. Now the question is how to clean the affected part? Check below.
- Use Baking Soda for Cleaning
The average consumer battery in your TV remote, wall clock or any other electronic devices are alkaline, due to the potassium hydroxide. It still burns, but it’s on the other end of the pH scale. It means you’ll need to use an acid to clean the remaining electrolyte solution. But when you move up to lead batteries and other larger batteries, the electrolyte solution typically consists of sulfuric acid or similar chemicals, which requires a different solutions approach.
- Wipe Away with Clothes
Once the cleaning agent does its work, it’s time to clean the affected part; you can clean the affected part in two ways are follows:
- Soft clothes- You can opt for any soft clothes to wipe it off, but be careful while you wipe. Check what's left and what not.
- Rough clean- If you still find some patches or acid mark, you can opt steel wool or toothbrush to clean it off.
- Check Damage
After the final cleaning it’s time to check the damage caused by the acid spill, take a look at the circuit and check whether every part is good to go or in some situation, some parts are affected which need to replace before you use the device again.
- Dispose of Batteries Properly
Every region has different disposable battery rules; we don’t want you to get into trouble, therefore check rules and regulations and dispose of safely. This practice will help to safeguard the environment.
We point a few important and useful measures, and these steps will help you to guide how to tackle with the situation. These precautionary measures give proper knowledge of battery disposal.