The development of technology in the professional sectors such as building, construction, fabrication, repair, etc. has seen an evident surge in recent times. A major contribution towards this development has been by the constantly evolving scientific up gradations introduced by our ingenious scientific minds. Tools and implements have a very close connection to the development of human history.
In the recent past, there has been a vast improvement in the technology of tools upon the introduction of power tools in the consumer market. Power tools are motorized tools and implements which are easy to work with for various activities while at the same time immensely reducing the time required to fulfil the task at hand. Power tools have become the standard specs for any hobby individual, a DIY enthusiast or a professional.
In this article we will provide you all the required information you will need to choose the best version of an Angle Grinder:
What are the power tools?
A power tool is a mechanical implement powered by an electric-based motor.
What are common uses for power tools?
The most common uses for most power tools are for activities such as drilling, sawing, grinding, polishing, sanding, blowing, cutting, etc.
What is an angle grinder tool?
An angle grinder cutting is basically a handheld power tool that is often used for actions such as grinding, polishing and cutting.
Why the tool is called an Angle Grinder?
The Angle Grinder as the name suggests is ideal to work on angles. The angle grinder has a disc or a blade which can be mounted on the gear head in the tool. The gear derives its power from the in-built motor which is at an angle of 90 degrees hence the name Angle Grinder. Another name for the tool is called a 90-degree grinder.
What is the average size of a disc?
The angle grinder is available with a wide range of disc variations for working in various positions. Angle Grinder 5” is an average size ratio for the size of the disc which suit for many purposes. There are different disc sizes available in the market for different needs.
What is the speed of the angle grinder?
Depending on the motor the average speed at which the disc of angle grinder rotates is at 5000 – 10000 revs per minute.
About comfort and usability?
The factors of size and weight are directly dependent on the level of comfort towards the usability of the angle grinder. The higher the power ratio and the higher the capacity of the battery, the greater will the weight of the power tool. In recent times, anti-vibration handles are available to reduce the impact of vibration caused by the motor of the tool.
What the average power of an electric motor?
The entire power derived by any power tool such as an angle grinder is from the electric motor. The motor basically defines the speed at which the gear rotates and further aiding in the completion of the task. The average power rating for an angle grinder is needed to be around 6 amps and between 110 to 230 volts. There are angle grinders available at higher and lower power ratings.
What are the various versions of power for angle grinders?
The angle grinders are commonly available in three distinct power-based versions such as cordless angle grinder, corded version and air compressor based versions depending on the user’s needs.
What is the latest version of an angle grinder?
The latest version is the brushless angle grinder.